- Home
- Products
- > White LED Driver
- > LED Flash
EUP3618
Charge Pump Flash LED Driver with Safety TimerDescription
The EUP3618 is a high-current charge pump, optimized for driving Flash LEDs used in camera phone and other portable applications. It has two modes of operation which are pin able for either Flash or Torch. In Flash mode, the EUP3618 output can drive 500mA regulated current an LED for a duration of 500ms or up to 700mA for a reduced duration. In Torch mode the EUP3618 regulates the output current to 40% of the Flash mode current setting and can remain enabled continuously.
The EUP3618 operates in 2x mode while operating in Flash mode. In Torch mode it can operate in either 2x or 1x mode depending on the load current, LED forward voltage, and input voltage levels.
Feature
- • 3A Output Current
- • Automatic Pulse Skipping Mode at Light Load
- • 35V Input Surge Protection
- • Integrated 160m_/110m_ DMOS Switches
- • 4.5V to 30V Input Operating Range
- • Output Adjustable from 0.925V to 20V
- • Up to 95% Efficiency
- • 1μA Shutdown Current
- • Fixed 340KHz Frequency
- • Programmable Soft-Start
- • Thermal Shutdown and Overcurrent Protection
- • Input Supply Overvoltage and Undervoltage Lockout
- • 230ns Minimum On Time
- • Available in SOP-8 (EP) Package
- • RoHS Compliant and 100% Lead(Pb)-Free Halogen-Free
Application
- • Distributed Power Systems
- • Networking Systems
- • PC Monitors
- • Portable Electronics