- Home
- Products
- > White LED Driver
- > LED Flash
EUP3611
1A Charge Pump LED DriverDescription
The EUP3611 is a large-current charge pump designed specifically for white LEDs used in camera flash applications. Only one small bucket capacitor is required to develop the output drive, providing a low EMI solution compared with inductive boost regulators.
The EUP3611 has two operation modes: Flash mode and Movie mode. In Flash mode, the EUP3611 is capable of delivering up to 1A. A safety timer is also included to ensure the LED can not be on indefinitely and overheat.
The EUP3611 is available in a 10-pin TDFN and WCSP-12 packages.
Feature
- •Flash mode - output current up to 1A at VIN=3.6V
- •Flash and movie - two able modes
- •Built in flash mode safety timer protection
- •1X and 2X automatic mode for high efficiency
- •Input range – 2.7V to 5.5V
- •External flash control pin for synchronization to a camera module or graphics controller
- •Short-circuit, over-voltage, over-current and over-temperature protection
- •Soft-start functionality
- •3mm 3mm TDFN-10 and 1.2mm 1.6mm WCSP-12 Packages
- •RoHS compliant and 100% lead (Pb)-free
- Halogen-Free
Application
- •Mobile Camera Phones
- •Digital Cameras
- •PDAs with Built-In Cameras